Johnson Hardware's 2066 Soft-Close Kit can support extra-heavy doors weighing up to 330 pounds. The kit is compatible with Johnson Hardware’s entire line of 200 Series I-Beam Track sets and the newly re-designed 2020 Door Hanger. When used in single-direction, soft-operation pocket-door installations (soft-close only), 2066 Soft-Close accommodates doors with a minimum width of 24 inches. For bi-directional, soft-operation pocket doors (soft-close and soft-open), the doors must be at least 32 in. wide. The kit can also be used for wall-mount/barn door and bypass installations, accommodating single-direction, soft-operation doors that are at least 20 inches wide, and bi-directional, soft-operation doors with a minimum width of 28 inches. The mechanism prevents pinched fingers between the door and the jamb, all while significantly reducing noise. Door slamming and bouncing that can occur with sliding doors is eliminated, reducing wear and tear on your door and jamb.

Roto Frank of North America's HPD1 is a hinged patio door locking system. This locking system supports taller doors between six feet and ten feet in height and includes three kinds of active locking points: 3-point tongues, 3-point shootbolts, and 5-point tongues and shootbolts. It comes with 35 or 45mm backsets with a 60mm backset under development, a one inch deadbolt and a reversible mishandling device to prevent damage to the door frame. It passed the AAMA 909 cycle test and the AAMA 1304-02 voluntary specification for determining forced entry resistance of side-hinged door systems.

Roto Frank of North America's HPD1 is a hinged patio door locking system. This locking system supports taller doors between six feet and ten feet in height and includes three kinds of active locking points: 3-point tongues, 3-point shootbolts, and 5-point tongues and shootbolts. It comes with 35 or 45mm backsets with a 60mm backset under development, a one inch deadbolt and a reversible mishandling device to prevent damage to the door frame. It passed the AAMA 909 cycle test and the AAMA 1304-02 voluntary specification for determining forced entry resistance of side-hinged door systems.

VBH's new BGT10 handle sets are taken from VBH’s Continental greenteQ product range and are available in the finishes white, brown, F1 silver anodised, F4 bronze anodised, and F9 dark silver anodised. There are standard and slim variants available. The standard external lever stands off the door face by 51mm, while the slim outer handle stands off by just 24mm, allowing it to pass the fixed mullion as the door slides open. BTG10 is supplied as separate inner and outer halves. This ordering format allows fabricators to choose a slim or standard outer, as well as opting for different internal and external colors for bi-color doors.

VBH's new BGT10 handle sets are taken from VBH’s Continental greenteQ product range and are available in the finishes white, brown, F1 silver anodised, F4 bronze anodised, and F9 dark silver anodised. There are standard and slim variants available. The standard external lever stands off the door face by 51mm, while the slim outer handle stands off by just 24mm, allowing it to pass the fixed mullion as the door slides open. BTG10 is supplied as separate inner and outer halves. This ordering format allows fabricators to choose a slim or standard outer, as well as opting for different internal and external colors for bi-color doors.

UAP's new key wind lock, Fullex Key Wind Lock, is designed specifically for doors with fixed handles such as pull handles and is suitable for composite and timber doors. It uses a key or thumb turn to engage and retract the bolts and latch. Once the door is closed, the latch can’t be operated without the key. It enables homeowners to benefit from security, reliability, and functionality. Other key wind locks on the market require the key to be turned between 360 and 720 degrees, whereas the Fullex Key Wind Lock enables the user to enter the door swiftly and easily. To operate the lock, it takes half a turn to withdraw the bolts, is then returned to original position, then turned again to retract the latch. In addition, UAP has developed a matching escutcheon, providing the option of a full, cost-effective system, including a pull handle, Key Wind Lock, high security escutcheon and 1 Star cylinder.

UAP's new key wind lock, Fullex Key Wind Lock, is designed specifically for doors with fixed handles such as pull handles and is suitable for composite and timber doors. It uses a key or thumb turn to engage and retract the bolts and latch. Once the door is closed, the latch can’t be operated without the key. It enables homeowners to benefit from security, reliability, and functionality. Other key wind locks on the market require the key to be turned between 360 and 720 degrees, whereas the Fullex Key Wind Lock enables the user to enter the door swiftly and easily. To operate the lock, it takes half a turn to withdraw the bolts, is then returned to original position, then turned again to retract the latch. In addition, UAP has developed a matching escutcheon, providing the option of a full, cost-effective system, including a pull handle, Key Wind Lock, high security escutcheon and 1 Star cylinder.

CRL new hinge lines for framless shower enclosures include Bellagio, Como, and Lugano. Each family of hinges has been tested to 100,000 cycles, five times the industry standard for performance testing. Rigorous testing ensures the hinges will operate flawlessly in both residential and commercial environments. CRL is also introducing a brushed bronze finish for shower door systems due to increased demand for bathroom hardware in the brushed bronze finish. CRL has added this luxurious look to its premier sliding shower-door systems. Both Cambridge, the classic-looking, smooth-sliding shower-door system, and Crescent, with distinctive round rollers and circular-shaped headers, are now available in brushed bronze.

CRL new hinge lines for framless shower enclosures include Bellagio, Como, and Lugano. Each family of hinges has been tested to 100,000 cycles, five times the industry standard for performance testing. Rigorous testing ensures the hinges will operate flawlessly in both residential and commercial environments. CRL is also introducing a brushed bronze finish for shower door systems due to increased demand for bathroom hardware in the brushed bronze finish. CRL has added this luxurious look to its premier sliding shower-door systems. Both Cambridge, the classic-looking, smooth-sliding shower-door system, and Crescent, with distinctive round rollers and circular-shaped headers, are now available in brushed bronze.

The 9000 Series rollers from Anthony Innovations can handle even the biggest panels. The system can manage loads up to 800 pounds. It features wheels available in stainless steel and in CNC-machined polymer material. A single-bogie carriage offers balanced load distribution and smoother glide, and customizable mounting tabs and spacers make it easy to adapt different existing systems.