Haffner’s SAC-845 will make a difference in your operation and give you CONTROL over the process while improving your bottom line! With the SAC-845 your estimated typical cycle time for a 24″ x 36″window screen frame is approximately 35 seconds, including all handling. This would require ONE operator for approximately 60 screens/hour.

The SAC-845 automates the application of screen mesh to a pre-assembled screen frame. The SAC-845 utilizes bar code scanning or direct ERP input to identify the screen frame, automatically choose and apply the correct screen mesh, insert the screen spline, and trim excess perimeter screen mesh. The larger SAC-855 Automatic Bug Screen Mesh & Spline Insertion Machine for patio doors and window screens will accommodate sizes up to 48″ x 96″.

See us at GlassBuild Booth #5158

Express 440CW is a small mobile vacuum lifter by Quattrolifts that is counterweighted and small enough to work in restricted spaces. The vacuum head has multiple adjustments to allow for precision movements during installation and the capacity to move through small door and hall ways.

Express 440CW is a small mobile vacuum lifter by Quattrolifts that is counterweighted and small enough to work in restricted spaces. The vacuum head has multiple adjustments to allow for precision movements during installation and the capacity to move through small door and hall ways.

The Nomad 880 by Quattrolifts is a small vacuum handling machine that can be easily broken down into three sections weighing about 50 pounds each, that can be loaded onto a small truck to transport to site and then easily assembled by two operators. The Nomad has a lifting capacity of 880 pounds and can be ungraded to 1100 pounds. Due to its lightweight, it is also ideal to work on floors that require minimal loading. The Nomad has multiple accessories that allow for the transport and installation of glass, windows, stone and porous panels.

The Nomad 880 by Quattrolifts is a small vacuum handling machine that can be easily broken down into three sections weighing about 50 pounds each, that can be loaded onto a small truck to transport to site and then easily assembled by two operators. The Nomad has a lifting capacity of 880 pounds and can be ungraded to 1100 pounds. Due to its lightweight, it is also ideal to work on floors that require minimal loading. The Nomad has multiple accessories that allow for the transport and installation of glass, windows, stone and porous panels.

Designed for cleaning vinyl windows and doors, the twin-head vinyl corner cleaner was designed by integrating automation technologies that have been used effectively for years in markets where high volume, quality, safety and precision are top priorities. This 12 axis robotic machine, with infinite axis accessibility, provides: complete corner cleaning; reduced material touch ups; consistent, repeatable movements; multiple angles of attack and presentation of tools at unique and previously unattainable angles. Features: Dual zone light curtains and ergonomic operator guarding. Eliminates/minimizes hand cleaning. Meets ANSI +R15. Robotic articulation equals total tool path flexibility. Robotic arm reach enables tools to clean the square from underneath and off corners. Up to 15% faster than current technologies. No longer limited to step movements. Fully-enclosed and self-contained: minimal exposed cable and moving parts equals less cable wear, and no exposure to vinyl dust/chips. Easy access to tool changing. Vertical and horizontal pneumatic material clamping. Single corner cleaning option for frames less than 20 inches. High efficiency scrap cleanout system to reduce vinyl dust on floor. Advanced programming for contoured non-linear surfaces. UL 508A, CUL & CE approved

Designed for cleaning vinyl windows and doors, the twin-head vinyl corner cleaner was designed by integrating automation technologies that have been used effectively for years in markets where high volume, quality, safety and precision are top priorities. This 12 axis robotic machine, with infinite axis accessibility, provides: complete corner cleaning; reduced material touch ups; consistent, repeatable movements; multiple angles of attack and presentation of tools at unique and previously unattainable angles. Features: Dual zone light curtains and ergonomic operator guarding. Eliminates/minimizes hand cleaning. Meets ANSI +R15. Robotic articulation equals total tool path flexibility. Robotic arm reach enables tools to clean the square from underneath and off corners. Up to 15% faster than current technologies. No longer limited to step movements. Fully-enclosed and self-contained: minimal exposed cable and moving parts equals less cable wear, and no exposure to vinyl dust/chips. Easy access to tool changing. Vertical and horizontal pneumatic material clamping. Single corner cleaning option for frames less than 20 inches. High efficiency scrap cleanout system to reduce vinyl dust on floor. Advanced programming for contoured non-linear surfaces. UL 508A, CUL & CE approved

Lattuada’s TLR 11 AV C PC H85 is a fully automatic, 11-wheel mitering machine equipped with the company’s A-WR system that offers diamond and resin wheels, automatic pre-setting, polishing wheels, and automatic wear recovery. An i-AL system allows automatic adjustment of the machine’s parameters based on the glass thickness. It is also equipped with a motorized adjustable infeed conveyor, digital ammeters, an automatic alert system for wear on the polishing wheels, and teleservice.

Lattuada’s TLR 11 AV C PC H85 is a fully automatic, 11-wheel mitering machine equipped with the company’s A-WR system that offers diamond and resin wheels, automatic pre-setting, polishing wheels, and automatic wear recovery. An i-AL system allows automatic adjustment of the machine’s parameters based on the glass thickness. It is also equipped with a motorized adjustable infeed conveyor, digital ammeters, an automatic alert system for wear on the polishing wheels, and teleservice.

The MC 316 Fabcenter automated production line by Mecal is an advanced manufacturing cell, sawing and machining line, for aluminum and PVC windows and doors, or similar extrusions. Consisting of a horizontal loading table with user-definable partitions, the processing unit contains a 3-axis sawing head and 6-spindle—with an option for 8—machining element with 360-degree rotation of the tool-holding frame. A material rotation axis on the gripper to add machining capability is optional.